Having sorted out my aspect ratio problem I ran into another one. I was playing a file and when FF was pressed the screen went black with the stop symbol showing in the top right of the screen. A bit of playing around found it would only respond to two keys. If I restart it with the power key it can't refind the server until I restart it on the host computer. The other key was the "OK" key. When this was pressed it restarted another file at which point I could carry on as normal. The file that restarts appears to be whichever was the first file that was played when the MVP was restarted. Sometimes the file that restarts just goes straight to the black screen as well which necessitates a restart of the server. I am not sure if FF is the only command that prompts this. It also seems to relate to the files selected, I found one file that would do it every time but other files would be fine.

Here is a section of the exe log

8/12/2004 8:55:57 AM.953 VERBOSE [29] about to check
8/12/2004 8:55:58 AM.031 VERBOSE [28] MVP data read: 1
8/12/2004 8:55:58 AM.031 VERBOSE [28] User pressed: 15
8/12/2004 8:55:58 AM.031 VERBOSE [28] Fast Forward
8/12/2004 8:55:58 AM.031 VERBOSE [28] MVP not sending frame
8/12/2004 8:55:58 AM.031 VERBOSE [28] MVP request processed
8/12/2004 8:55:58 AM.234 VERBOSE [29] Request 200000 bytes (file size:3230820352 file location: 16800000)
8/12/2004 8:55:58 AM.234 VERBOSE [29] about to check
8/12/2004 8:55:58 AM.421 VERBOSE [29] Here we go: 0 E7 EF 0 0 0 0 0
8/12/2004 8:55:58 AM.421 VERBOSE [29] Received request to seek to pos:15200000
8/12/2004 8:55:58 AM.453 VERBOSE [29] Request MEDIA_FAST (forward)
8/12/2004 8:55:58 AM.453 VERBOSE [29] Processing block from: 15460000
8/12/2004 8:55:58 AM.453 VERBOSE [29] Read: 300000
8/12/2004 8:55:58 AM.453 VERBOSE [29] Start: 92631
8/12/2004 8:55:58 AM.453 VERBOSE [29] End: 154162
8/12/2004 8:55:58 AM.453 ERROR [29] Media stream thread caught exception: Object reference not set to an instance of an object.
8/12/2004 8:55:58 AM.453 ERROR [29] at o.ah()
8/12/2004 8:55:58 AM.953 VERBOSE [29] MVP Streaming thread waiting for connection
8/12/2004 8:55:59 AM.312 VERBOSE [28] MVP data read: 1
8/12/2004 8:55:59 AM.312 VERBOSE [28] MVP request processed
8/12/2004 8:56:03 AM.500 VERBOSE [28] MVP data read: 1
8/12/2004 8:56:03 AM.500 VERBOSE [28] MVP request processed
8/12/2004 8:56:08 AM.531 VERBOSE [28] MVP data read: 1
8/12/2004 8:56:08 AM.531 VERBOSE [28] MVP request processed
8/12/2004 8:56:10 AM.781 VERBOSE [28] MVP data read: 1
8/12/2004 8:56:10 AM.781 VERBOSE [28] User pressed: 27
8/12/2004 8:56:10 AM.812 VERBOSE [28] MVP not sending frame
8/12/2004 8:56:10 AM.812 VERBOSE [28] MVP request processed
8/12/2004 8:56:13 AM.562 VERBOSE [28] MVP data read: 1
8/12/2004 8:56:13 AM.562 VERBOSE [28] MVP request processed
8/12/2004 8:56:15 AM.406 VERBOSE [28] MVP data read: 1
8/12/2004 8:56:15 AM.406 VERBOSE [28] User pressed: 32
8/12/2004 8:56:15 AM.468 VERBOSE [28] MVP not sending frame
8/12/2004 8:56:15 AM.468 VERBOSE [28] MVP request processed
8/12/2004 8:56:17 AM.781 VERBOSE [28] MVP data read: 1
8/12/2004 8:56:17 AM.781 VERBOSE [28] User pressed: 20
8/12/2004 8:56:17 AM.781 VERBOSE [28] MVP request processed

ok i really like the look and things you have for this pvr and plug-ins. is there any way i can use it for this conexant 2388x WDM driver my capture card has svideo and compesite. is there away for ur GB-PVR can recanicy it?

it is a ctx capture card.

I am thinking of building a system around the shuttle Zen ST62k. Will GBPVR work on a direct x 8.0, I assume it will?

I have a Caller ID plugin about ready.  However, there are some gbpvr issues that need to be resolved before I can officially release it.  But there are a couple things you can do to get your system ready.

For those interested in trying this, you can go and get the YAC Caller ID program and get that setup and running on your network.  You can run the main YAC program either on your GBPVR box, or on another box on your network (so you don't have to have a modem in, or run a phone line to, your gbpvr box if you don't want to).  Test it out on the install machine and get it working nice.  Then when you get the CallerID plugin you just need to configure a 'listener' in YAC.  If YAC is running on the gbpvr box, you will create a listener to 'localhost'.  If it's on another box on your LAN, you set the listener to the IP of the gbpvr box.

By default, YAC (and the CallerID plugin) uses port 10629.  if this doesn't work for you, change it in YAC and in the CallerID plugin config.

That should be all there is to it!

Here is what it looks like now.  It will look better once sub fine tunes the method of plugins putting text on the screen.  Up until now, no one has really tried this method before

I can't create topics in 'getting started', so maybe there should be a forum to announce things like new plugins etc.

I'd like to be able to play music with winamp so I can control the playlist, change things quickly ect. So basicly I have a splitter that will let me loop what ever sound comes out of the computer back into the hauppauge card.

I know GB-PVR can let you see live tv on the MVP comming from the PVR's cable input on the computer, but can it also show you what's comming into the s-video or composit jack and the audio input? Or maybe there is some other work around?


Actually in the past I have also used a s-video cable to loop the video from my graphic card right into the PRV to record my self gaming. It's kind of funny, but the video quality is terriable.

Sub,

I had an odd thing happen. I had LiveTV(Ch 50) playing on an MVP. Using the PC client, I scheduled a show(CH 2) to record at 3:00pm. I have two PVR-250s. At 3:00, liveTV stopped for a couple of seconds. When it came back on the show was the Ch 2 show that was suppose to be recording. The filenames were messed up also. The was a small non growing file for the Ch 2 recording. The actual video from Ch 2 that was being played on LiveTV was being put into a file under the LiveTV directory and had the name of the original Ch 50 show.

It is still recording right now. Do you want me to stop everything and send logs or wait until recording is finished and send logs?

Bryan

At present I use a PVR350 and use the supplied Hauppauge IR cable to control GBPVR. This then controls USB UIRT to change channel on my STB.

When I used sage I was able to use the USB UIRT to both receive and transmit codes.

I am about to switch to a PVR150MCE this does not have a Hauppauge ir input. Is it therefore possible to use USB UIRT as my remote control receiver as well as transmitter.

Hope that makes sense.

Can someone post her/his comskip.ini from a working configuration?

I'm using comskip 0.63 in GB-PVR 0.23.11.

Comskip seems to work, but I'm having two problems:
1. Not all of the comskip-files will be deleted by GB-PVR when deleting recordings.
2. Skipping when showing a recording seems not to work properly.

I have found both questions here in the forum but no solution for it. ?!?

Just looking for other users experiance with the Via m10000 Boards?
I plan on using one of these boards with a PVR-150 using the Onboard Svideo out on the MB to a Standard Def TV.
200 GB Harddrive, 512 MB RAM.