Should I be able to record multiple stations on the same frequency with a single Ceton tuner if I remove the CableCard & I am using it as a QAM tuner?
I removed my CableCard and added two stations that are on the same channel to the first tuner on my Ceton InfiniTV 4 card. With my other QAM tuners, I can record both stations at the same time with a single tuner. I wasn't able to do that with the Ceton. If I should be able to do it with 3.6.6, I will reproduce & capture the logs. If I shouldn't be able to do it, is it something that could be added? I know it is not supported when the CableCard is installed & assume it won't ever be supported in QAM mode but wanted to be sure.
As title, I get a crash with this error when trying to schedule with NEWA in 336?
Cheers
k.
Code:
[COLOR=#000000][FONT=Verdana][h=1]Server Error in '/' Application.[/h][h=1][/h][h=1][HR][/h][h=2][I]Object reference not set to an instance of an object.[/I][/h][/FONT][/COLOR][FONT=Arial, Helvetica, Geneva, SunSans-Regular, sans-serif][COLOR=#000000][B]Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
[B]Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.
[B]Source Error:
[TABLE="width: 100%"]
[TR]
[TD]Line 493: RecordingQuality quality = RecordingQuality.QUALITY_DEFAULT;
Line 494:
[COLOR=red]Line 495: switch (Request.Params["_ctl0:ContentPlaceHolder1:quality"].ToLower())
[/COLOR]Line 496: {
Line 497: case "best":[/TD]
[/TR]
[/TABLE]
Video card in my desktop that Next is running on nagged to upgrade the program. After some time I decided to do so. Blaaaah! It worked OK but one part of the new version where the over scan slider control was is different. It was grayed out with an "explanation" on how to turn it on. Well it never did come on no matter what I did and the picture was much larger than my 65 inch TV. So, I went back to the older version and all is back the way it was.
So, sometimes newer is not always better.
As title, I cannot seem to edit the Clients (I have an NMT PCH A110) the in Client Tab and I also get an Error on attempt at removal of the two devices in there, which seem to be "model" devices. I could modify the config.xml but it shouldn't have to work like that surely?
I am a bit surprised at this version as it seems to have lost a lot of settings that previous updates always retained. Like all my Media Folders, which I just had to put back. Default screen for Recordings was also lost
Do I have a bad config from so many updates over the years? And how can I fix the Client Device setting?
k.
Code:
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.ArgumentException: The node to be removed is not a child of this node.
at System.Xml.XmlNode.RemoveChild(XmlNode oldChild)
at NextPVR.Settings.ClientPage.buttonDeviceRemove_Click(Object sender, EventArgs e)
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
Hi, I am using AEON skin, the EPG data is all overlapped and unreadable, I tried going into the settings for the add on but I can't change the res. Is my skin the problem?
In Recording sub menu to be able to Search for all the films from the EPG , then from the list, can click on it to get a description and to be able to decide if I want to record it or not
I've set up a rather complex script to run as PostProcessing.bat. It basically extracts closed captions as an SRT file, compresses the TS file to MP4 with subtitles, uploads the resulting file to an FTP server and moves everything to a NAS when done. This all happens in the background because I've found no way to bring up the CMD screen while the processing is being executed. Is there a way to either show that screen and close it when all is done, or at least log everything into a LOG file?
I have 3 x RTL2382U based USB tuners running on Server 2012 R2 however I am not able to tune FM. I had a hell of a time finding drivers and getting this thing working in the first place, does anyone have any suggestions?
I am aware of the 3.6.6 update containing some fixes for the mostly empty EPG after the overnight update runs but mine still happens with 3.6.6 unfortunately.
I have just moved to a new HTPC completely as part of upgrade but I have had this problem all the time previosly, and I am a little bit frustrated one can say, not giving up but i would like to resolve it as I like NextPVR otherwise.
Everything is fresh installed Windows 10 etc etc..
I will try to include all the information up front
Hardware:
Motherboard: Gigabyte GA-B85-HD3M
CPU: i7-4790
Video: Intel HD4600 (From CPU)
Memory: 2x2GB DDR1600 soon to be 2x4GB when the postie arrives..
HDD (OS): Samsung 850 EVO 250GB SSD
HDD (Recording - Currently while testing): Seagate 500GB 7200RPM
TV tuner 1: Pinnacle 3010X PCTV Dual DVB-T Hybrid Pro PCI-e installed using AverMedia H788 DVB-T driver (Old trick, found better PQ and channel switching speed)
TV tuner 2: Hauppauge WinTV HVR2200 Dual DVB-T PCI-e
Software:
Windows 10 Pro x64 with all up to date updates
NextPVR 3.6.6
Kodi 15.2 (But EPG problem is not in Kodi, it displays the same information as NextPVR)
Problem:
NextPVR wont do an update on most days to the EPG so it is empty till manually update from settings screen (works very reliably every time using the Update EPG button).
Now, I think the problem actually occurs more often then not.
02:54:00 AM - Automatic EPG update
10:44:16 AM - Manual Update EPG action in NPVR.log (same morning of the failed automatic EPG update)
Notes:
So everything is set up fresh, literally everything is as new.
The HTPC is set to sleep after 30 minutes and hybrid sleep is disabled, so it only sleeps in S3 otherwise I cant use the remote control to wake the PC.
Only one device is set up (out of 4 tuners available in the settings) for testing purposes, it is one of the AverMedia tuners.
What I can see?:
Looking at the logs the overnight update goes into ndigitalhost-27.log and the manual sticks to NPVR.log. Entries for automatic EPG update in NRecord.log too
Looking at the logs it looks like signal strength is low to 0% when it does the EPG update at night causing the problem?
I have had this problem dragging with me constantly and have been unable to shake it. I would love to get it working as intended.
All logs are attached from NextPVR log directory from the time the automated EPG update ran for relevance/inclusion if helpful.
Settings screenshots also attached to thread.
