I installed 2.2.6 then late Sunday evening the first time I ran the new version the client crashed three times within about 15 minutes so quickly replaced the client computer with an old one with the previous version installed to see the end of the programme. There was obviously a serious problem so checked the forum where there were others with similar problems and the new NPVRTSReader file which I installed but it was too late to try it by then.
This morning as a test I started the client running a two hour film to itself but 45 minutes later I saw the server go into sleep mode so I knew the client had crashed. Enclosed is the client NPVR.log with the crash at 10:15 with a SQLite error and the Server NRecord.log has an âUnexpected exceptionâ at the same time. I have previously had Client crashes so now have extra logging enabled so also enclosed are the client reader.log and stream.log files covering the client crash.
It would seem that the AnySee E7 T2C may be the solution to the situation in Sweden with terrestial broadcaster Boxer. Boxer does today encrypt all mpeg-4 and HD channels with a technique that requires a CI+ capable hardware CAM. The CAM includes an embedded encryption key that enables the decoding of those channels. Until now all attempts to use a software CAM has been futile since noone has the decryption key. If that was found however it could be fed to OSCam (a softcam) which can handle this decryption. The prospect of that is slim and the proper way to go is to use an official hardware CAM that has the key embedded. The E7 does all this and it is now reported that mpeg4 and HD channels from Boxer work with this tuner.
There is an SDK to enable the decoding which I guess has to be supported in NPVR. This is where Sub comes in...
In my livingroom I have a HTPC where I have installed NPVR as a client.
I have shared the the data folder at the server and I have shared the recording folder.
From Windows explore I can access the shared files and I can delete and edit them.
From NPVR I cannot play them but I can se the recorded show, When I choose watch nothing happens. I have tried move a file to the local harddrive and play it from the video folder. Then NPVR plays it. Therefor I do not think there is any codec problems.
When I look at the logfile it is pointing to D:\Optagelser_NPVR\Juno\Juno_20110828_15051645.ts. D is the local drive at the server where the file is stored. But is the program looking at the HTPC's local harddrive D?
I set up NPVR recently and got it all configured and installed. My last step was to attempt to configure the IRBlaster on the capture card (HVR-2250). The software for the HVR-2250 appears to need to learn from the cable box (Comcast Motorola DCH3200) remote, but whenever I try I just get "Your remote does not appear to support the toggle bit - Retry Learning1"
I've seen other mentions of this issue, but no resolution. Has anyone gotten this to work or do I need to buy a different capture card/blaster? This is really starting to tick me off...
Just a reminder for anyone on this transmitter, they have switched frequencies this morning so you will have to delete your existing channels, set region to "All Regions" and re-scan to set-up your "Devices" again.
The new channels will also need their EPG source and channel numbers set.
If you collect EPG data off air you may also need to change the frequencies your EPG collector uses, e.g. for "EPG Collector" edit the Configuration/Tuning parameters/dvbt/New Zealand.Kapiti - Ngara.xml file and reconfigure to use the new frequencies (586000, 570000, 602000).
Sorry for the long title - but I am having all the above issues.
I have searched previous posts on some of these issues and tried suggested fix's but to no avail.
To clarify, right clicking and selecting "setup" I see in red:
"WARNING: The DirectX runtime is not available on this machine. Software rendering instead."
When trying to play live TV I get the message:
"Unable to communicate with recording service."
And when trying to update the EPG it crashes.
I am running Windows 7 Ultimate, I have .Net 3.5 (& 4), DirectX 11 (& have tried running the web updater of 9.0c)
Have all the latest Win7 updates.
I think I may have disabled Windows Media Centre - that's the only thing I can think of that logically might cause a problem.
I was successfully using GB-PVR until a day or so ago when I upgraded to NPVR. Am hoping I wont have to go back to GB-PVR...but right now can't see any other options - so would really appreciate some input.
Many thanks in advance.
My reoccurring recordings and any manual recordings set from within the application or NEMA are failing. Going through my log, it gives the following error:
Code:
2011-08-28 09:11:22.265 [ERROR][1] Unexpected error saving scheduled recording: System.Data.SQLite.SQLiteException: SQLite error
14 values for 13 columns
at System.Data.SQLite.SQLite3.Prepare(SQLiteConnection cnn, String strSql, SQLiteStatement previous, UInt32 timeoutMS, String& strRemain)
at System.Data.SQLite.SQLiteCommand.BuildNextCommand()
at System.Data.SQLite.SQLiteCommand.GetStatement(Int32 index)
at System.Data.SQLite.SQLiteDataReader.NextResult()
at System.Data.SQLite.SQLiteDataReader..ctor(SQLiteCommand cmd, CommandBehavior behave)
at System.Data.SQLite.SQLiteCommand.ExecuteReader(CommandBehavior behavior)
at System.Data.SQLite.SQLiteCommand.ExecuteNonQuery()
at NUtility.ScheduledRecording.Save()
I recently reinstalled and then upgraded to version 2.2.6. I am currently using the SearchLite plugin v1.3 and GuidePlus v0.72 for renaming the recordings. I did restart the recording service and restart the computer to no avail. Any help would be much appreciated. Thanks
I'm really happy with having a direct button to delete a recording from the recordings list introduced in 2.2.6. However, it doesn't seem to work yet. I get the confirmation pop-up, and click on "OK", but then the recording doesn't get deleted. Attached is an excerpt from the log showing 1 attempt to delete from the list and then finally, using the old method of (successfully) deleting from the details screen:
Symptons: start watching Live TV on NPVR configured as a client. 15-20-30 minutes in, NPVR will go unresponsive and the standard Windows "NPVR Has Stopped Responding" dialog will pop up.
Exiting the program and restarting it seems to be enough to reset it and continue on, even watching Live TV i.e. Server seems unaffected.
Been watching Live TV directly on the server for about an hour now with no issues. Seems client related only. Client Logs attached, can't get at the server at the moment to grab those logs.
Updated to 2.2.6, no audio in HD-PVR. Checked the device setup and SPDIF is selected (my audio source). For fun, tried to toggle the settings to component. Settings will not stick in either direction; suspect this may have something to do with it.
Logs attached.
[EDIT] found <ForceSPDIF>false</ForceSPDIF> in my Config.xml under the HDPVR. Setting that to true fixed my audio issue. I suspect it may not be needed at all anymore in 2.2.6, but with wife and kids wanted the TV so I didn't have time to test that theory.
