Hi, I'm using 1.4.7 and I keep getting locked DB errors when loading my guide. The only way to fix it is to remove the recording and reschedule it. Or empty the EPG multiple times but that doesn't fix it either. I'm attaching the logs from my earlier update. Any help appreciated.
Thanks!
I did something to mess up the TV Recordings plug-in. Unfortunately, I did a number of things before I noticed theproblem so I can't simply undo one thing.
When I select READY, to try to display a list of all recordings, the list is empty. The standard RECORDINGS plug-in shows the recordings though.
How can I "reset" the TV Recordings plug-in so it sees all the recordings?
I have 3 or 4 channels that are not populating with program information in the TV Guide.
One of the 'missing' channels is the History Channel. I see the channel listed in the guide. I can watch the channel - it just doesn’t get any program info - so I can never record any of the shows on that channel.
I use schedules Direct - I logged in and checked my lineup and they have History listed as 64.
In the config app, under capture device settings - History ch is 67 and checked (there are several other 'History' listings but not checked).
On the channels tab History is 64 and checked (there are several other 'History' listings but not checked).
I have tried various combinations - sometimes I had guide metadata but when I tuned to the channel it was not the right channel (fuzz/static).
I updated EPG info (capture device settings ) and it added additional copies of the channels.... in this example it added History as ch 99.
In the guide, ch 99 had the program info - but when I tune to it all I get is fuzz so I unchecked it again.
I have made so many iterations I am now thoroughly confused. Can someone please help my sync the SD metadata with the correct channels?
I am new to this site, and PVRs for that fact. I have just competed setting up my Hauppauge 2250, but my guide in GBPVR is off by two hours. I have looked all over for settings that might display my time zone, but can't find anything. Has anyone else had this problem or know how to fix it? Thanks.
I have a Hauppauge 2250, which I have had set up and working fine for some time now. Due to having a settop box, I only use one of the receivers. I did not purchase the model with the remote, however, so last week I went to the Hauppauge site and bought the MCE Certified Remote with IR Blaster http://registration.hauppauge.com/websto...mce_remote. I have it all plugged in and working fine in Media Center.
My problem now is that I cannot get the dratted thing to change the channels on my settop box with GB-PVR. I have tried to read the threads concerning how to do this, but I have found the advice to be confusing and (apparently, at least) conflicting.
Can somebody please explain, in simple terms, exactly what I need to do to enable GB-PVR to change the channels on my settop box so that I don't have to worry about leaving it on the proper channel when I have a scheduled recording approaching but may have last been watching some other channel?
why can it happen that when I select "Record season (all episodes on this channel)" for recording a show and then I verify it with recordings / recurring I can see Daily, between... instead of all episodes?
I've been having problems playing mp4 video files with 6 channel AAC audio. Audio plays through the wrong speakers - the center channel comes out through the front right speaker for example. I also only seem to get 5 channels, rather than 6 - nothing comes out of the surround left speaker.
Using this information I've managed to work around the problem to some extent, using the mixing matrix in AC3Filter to redirect the channels to the correct speakers (as far as I can tell), but this is not really a satisfactory solution as
1: I'm getting 5 channels rather than 6 (I think it's the LFE channel missing)
2: I have to manually activate a preset in AC3 filter every time I play one of these files.
I've tried both CoreAAC and monogramAAC filters, with the same result.
Surround sound (spdif out) works fine with all other files.
I have my new HTPC together with Win 7 pro x64 with an i3 540 running nice and quiet and smooth.
The issue is I have a harmony one remote and my old sensor for the keyboard/remote which had mouse and keyboard ps2 connectors doesn't work on this new machine.
I bought an hauppauge 2250 with the remote thinking I could use the sensor, but now I am wondering, how do you boot the machine with the remote?
Does anyone know of a fairly simple way to do this? I am willing to buy a new sensor or keyboard or remote to get this to work. I read most of the remote guide, but did not find anything too current. I know my last system came together 5 or 6 years ago.
I've out grown the four ports on my linksys router. A while back I bought a Linksys switch and it worked fine for a little bit and quit. I got it replaced and it quit after a little bit again. GRRRR! Ok, I got a cheapie Trendnet that was well reviewed on NewEgg. It's worked well for four months or so, but now it's becoming flaky. Basically it just slows way down. I have an Xbox, Popcornhour, and a PC on it and they all slow down. No errrors are given, transfers between them are just dog slow. If I unplug the switch and plug it back in the wahlah, it works for a while and then things get slow again.
Now I'm annoyed, is there a decent quality reasonably priced switch out there?
The commercial duty 3com SuperStacks are on fleaBay cheap, are they worth looking at?
As always, thanks - I really appreciate all the help and advice given here!
Just installed gbpvr 1.4.7. When trying to save options in config.exe, the program hangs. I was able to make some changes directly to config.xml. What tags do I put in to add a capture source directly to config.xml?
