I've tried several solutions to solve this issue with no luck.
I updated the EPG program about a month ago, which I don't think caused this issue as it was working fine until I started the play with the EWA (I think).
I tried the SQL solution to only have GBPVR give me an error about a bad configuration.
I have been using MCE05 to pull my listings from. I think I noticed the file where it shows all the listings contains the 0000. ( I don't remember where I was looking) This is why I tried the SQL fix.
I've attached another improvement to the PCH client. Because there as been a few of these patches, I decided to attached all three files that have been changed since the 1.2.9, so you can easily make sure you have the latest files relevent to your PCH.
The specific new changes are:
- Smoother playback of .mov files. Previously there could be some corruption.
- Much improved music support. Now when you play audio files in GB-PVR it'll automatically generate a playlist and submit this to the PCH for playback. This mean you can now skip back/forward between audio tracks in the playlist, eliminate the big delay between tracks, and most importantly can stop the music playback. You also need to have the new mvpmcx2 installed, and the current PCH firmware for this to work.
Previous changes also included in these:
- highdef UI support
- smoother playback of .avi/.mkv files
- automatically disables resume prompting on PCH clients
- automatically disables unneeded format transcoding on PCH clients
I have a filter that used to work until I upgraded to the latest version of GBPVR and Searchwiz. Now, even when more than 500 records would be returned (My filter is for All Movies and I have 14 days of EPG downloaded) it stops at 500 recs. Anyone else seen this?
Aplogies if this has been covered elsewhere - ive done a few searches but havent found the exact issue i have...
My PC previously had a Hauppauge NOVA-S-PLUS card with the jackpoint for a hauppauge remote , I also had an analogue PVR150 card.
Since there was only 1 card in the system that supported the remote - this all worked fine and dandy.
Last night i added another card to the equation - a Hauppauge HVR-4000 for the DVB-T side of things (and addtional sat source).
Ive been able to pick up sat and DVB-T (and seem to have have analogue side of it working too) - so might be able to remove the PVR150.
My only issue is this - my formerly working remote doesnt work at all !!
Ive tried plugging into the nova-s (where it was previously) - ive also tried plugging into the HVR-4000 .... and neither seem to do anything.
I had the direct access to hauppauge turned off via the gbpvr config previously - as more of the buttons on my 45 button remote seemed to function when using it non-directly using the hauppauge IRremote software.
Any ideas / tips / tricks on how to get my remote working again - as my pc is pretty much useless without a remote.
I find it really annoying when scrolling up and down the recordings list I see something I want to watch only to find out when I select it that in fact it failed due to a clash. I'd like it to indicate that a recording has failed on the top level recordings list, maybe rather than saying '2 recordings' it could be '1/1 recordings', i.e. 1 workied, 1 failed or similar.
Hope that makes some sense.
Thanks, and you can safely assume that if that's all I want then you must have done a fantastic job so far!
Hey, I'm having trouble receiving my hi-def channels (regular come in fine) with GB. I have the latest release (1.2.9), and I'm using the NVidia Video & Audio decoders, as well as the MainConcept multiplexer. I've also tried the DVR-MS multiplexer, and other codecs. I receive audio just fine (all hi-def channels are ac3), but I get no video (says no signal detected while the audio plays). I can get these channels in MyTheatre, so I know that it is possible to get them.
First another big thank you to Sub for the fantastic work so far, and each release just gets better and better. Here's my wishlist for even more GBPVR goodness:
* Command-line startup switches for aspect ratio and which screen to start on - my primary monitor is a the 4x3 CRT TV, my secondary is a 16x9 100" widescreen projector which we use when we watch movies. I currently have to do this using an ugly batch-file that rewrites config.xml "on-the-fly" with the correct Aspect-ratio and Start-on-second-monitor XML settings before it starts PVRX2 (BTW if anyone wants a copy of this I'm happy to post it in the forums).
* Auto-zoom feature that works out the best way to zoom a video automatically, without changing the aspect ratio, so it reaches the edge of the screen in at least one direction (top/bottom or left/right) and therefore uses the maximum screen "real-estate" available without losing any edges or being distorted.
* FF and Rew keys to work the same in Music Library as they do when playing videos, i.e. skip back and forward within the track
* Ability manually to add a description to recordings, for when the TV guide doesn't have one (or when I stupidly and accidentally delete my recordings database and have to reimport the recordings!)
* Ability to manually add a description to movies in the video library - guess that would probably require a movies database; is there already a a plug-in that allows this?
* Setting to make the volume control adjust just the WAV output, so it will work when using SP/DIF output
* Fix the problem where video playback freeezes when FF, Rew, Skip, Replay or Pause is pressed when using EVR under XP for watching DVDs (works fine for AVIs).
please help - i have just got a leadtek winfast usb dongle gold (dvb-t)
windows xp sp2 - latest bda drivers - works fine in leadtek winfast pvr2
however i cannot get it work in gb-pvr (or mediaportal for the same reason i think) - basically i cant seem to find the filters i need.
this is the filtercheck.log:
19:39:09.557 INFO Log started
19:39:09.557 INFO Filter Check v1.0
19:39:09.557 INFO
19:39:09.557 INFO
19:39:09.557 INFO Checking AM_KSCATEGORY_CAPTURE filters
19:39:09.589 INFO found: Realtek HD Digital input
19:39:09.589 INFO - (output) Capture
19:39:09.589 INFO - (input) Input1
19:39:09.589 INFO
19:39:09.589 INFO
19:39:09.589 INFO
19:39:09.589 INFO Checking AM_KSCATEGORY_ENCODER filters
19:39:09.604 INFO
19:39:09.604 INFO
19:39:09.604 INFO Checking AM_KSCATEGORY_CROSSBAR filters
19:39:09.604 INFO
19:39:09.604 INFO
19:39:09.604 INFO Checking AM_KSCATEGORY_TVTUNER filters
19:39:09.604 INFO
19:39:09.604 INFO
19:39:09.604 INFO Checking AM_KSCATEGORY_TVAUDIO filters
19:39:09.604 INFO
19:39:09.604 INFO
19:39:09.604 INFO Checking AM_KSCATEGORY_VBICODEC filters
19:39:09.604 INFO found: NABTS/FEC VBI Codec
19:39:09.604 INFO - (input) VBI
19:39:09.604 INFO - (output) NABTS
19:39:09.604 INFO - (input) HWNABTS
19:39:09.604 INFO
19:39:09.604 INFO found: CC Decoder
19:39:09.620 INFO - (input) VBI
19:39:09.620 INFO - (output) CC
19:39:09.620 INFO - (input) HWCC
19:39:09.620 INFO
19:39:09.620 INFO found: WST Codec
19:39:09.635 INFO - (input) VBI
19:39:09.635 INFO - (output) Teletext
19:39:09.635 INFO
19:39:09.635 INFO
19:39:09.635 INFO
19:39:09.635 INFO Checking KSCATEGORY_BDA_NETWORK_TUNER filters
19:39:09.635 INFO found: WinFast DTV Dongle Gold BDA Filter
19:39:09.635 INFO - (input) Antenna In Pin
19:39:09.635 INFO - (output) MPEG2 Transport
19:39:09.635 INFO
19:39:09.635 INFO
19:39:09.635 INFO
19:39:09.635 INFO Checking KSCATEGORY_BDA_RECEIVER_COMPONENT filters
19:39:09.635 INFO found: BDA Slip De-Framer
19:39:09.651 INFO - (input) NABTS
19:39:09.651 INFO - (output) IPv4
19:39:09.651 INFO
19:39:09.651 INFO found: BDA MPE Filter
19:39:09.667 INFO - (input) MPE
19:39:09.667 INFO - (output) IPv4
19:39:09.667 INFO
i tried the following in bda.ini:
[Leadtek Winfast DTV Dongle Gold]
TUNING_TYPE=DVB-T
RECEIVER_ONLY_MODE=1
FILTER_RECEIVER=Winfast DTV Dongle Gold BDA Filter
PIN_RECEIVER_IN=Antenna In Pin
PIN_RECEIVER_OUT=MPEG2 Transport
but it says gb-pvr was unable to start the device or something similar when i try to get the channels.
I have 1.29 install fresh. I setup a drive m:\ mapped to my server where I called the root share media. There are subfolders for my shows that I used to record with another application. When I go into gppvr from pc it accesses the videos fine. It displays all the subfolders in M:\. I have a mediamvp box that when I go to it and into video library all I see is a folder called media. I highlight the folder and press enter but nothing happens. I know the enter key works because I can click on different menu options and select it by pressing the enter key.
I don't understand why the mapping is different on the mvp then what is shown on the pc.
Forgive me, I am new at this and I am getting lost at all the different options I have read out there. Here is a quick rundown of my current setup:
GB-Server:
3.4 CeleronD
ECS 945PL-A board
2GB DDR2 533
8500GT 512MB PCIe
500GB Sata2
PVR-150
PVR-1800 (installing tonight)
WinXP SP2...GBPVR 1.2.9
Popcorn Hour on its way....for second TV
My question is how do I setup the graphics card to output to my LCD TV (full 1080p) and get a decent picture (currently it is blurry). I am lost as to what I need to set in config.exe for the 8500 card and what codecs I need to have installed for Live Tv viewing and recordings.
Currently the only source I have is regular analog cable and I am using the 150 to view and record that.
TV is connected via VGA cable(analog) right now because I can't seen to get the HDMI to DVI to display yet (settings I believe).
