I have just done a full format/reinstall of windows and thus GB-PVR and associated plugins.

I am trying to setup MyVideos and when I go into GB-PVR and go into MyVideos there isn't a button that is highlighted.

If I press the down key, nothing happens, if I press the right or left, key the arrows at the bottom right hand corner are highlighted and I can navigate correctly.

If I press the Up key first I get this error and it kills GB-PVR entirely. I have to exit and restart GB-PVR:

4/3/2005 7:16:44 PM.609 ERROR [2] Error: msg=0x100 (WM_KEYDOWN) hwnd=0x1b0108 wparam=0x26 lparam=0x1480001 result=0x0 : Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index : at System.Collections.ArrayList.get_Item(Int32 index)
at MyVideosPlugin.FileList.Draw(Image compositeScreenImage, Hashtable clickableRegions)
at MyVideosPlugin.MyVideosTask.render(Boolean& requiresMoreRendering)
at ci.a(Boolean& A_0)
at r.a(Object A_0, KeyEventArgs A_1)
at System.Windows.Forms.Control.OnKeyDown(KeyEventArgs e)
at System.Windows.Forms.Control.ProcessKeyEventArgs(Message& m)
at System.Windows.Forms.Control.ProcessKeyMessage(Message& m)
at System.Windows.Forms.Control.WmKeyChar(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at r.a(Message& A_0)
4/3/2005 7:16:48 PM.859 VERBOSE [2] ShowMouse ref=0

I have a large collection of movies and shows ripped to Divx avi files that I try to watch through the GBPVR front end. Ever since switching to the .91x versions I have had a huge problem. I can watch up to 4 of these movie files before GBPVR locks up. On the fifth one GBPVR locks up with a black screen forcing me to reboot to get through it. After the reboot I restart GBPVR but it continues to maintain the lock up and black screen when I try to play another avi file. The only thing that seems to break this problem is if I uninstall gbpvr and reinstall it. Then the cycle begins again.

I can try and provide the logs but I am hoping I'm not the only one with this problem and I hope there is already a workaround.

The system it's running on is an XP1800 with 1 gig of memory and a 120gb drive with a cd-rom running Windows XP SP1 and .Net 1.1 along with GBPVR .9109 on a wired network.

Thanks for any help you can give me.

UPDATE: It seems that it is not a factor of how many avi fiels I watch but the overall time. Just got done watching an hour and a half long movie and now it's locked up again. Please tell me we can figure this one out guys because it's beyond aggravating now.

Previously, GBPVR has worked great, with no problems. Thanks .

Now I'm getting an error on startup, which is slowing down the menus. I'm on a WinXPSP2/ObjectDesktop machine with a Hauppauge 250. Here's the log, if it helps:

4/3/2005 6:48:26 PM.437 VERBOSE [2] installDirectory is C:\Program Files\gbpvr\
4/3/2005 6:48:26 PM.437 VERBOSE [2] configurationFile is config.xml
4/3/2005 6:48:26 PM.437 VERBOSE [2] getValue() loading new key/value into cache: /settings/DatabaseConnectionString
4/3/2005 6:48:26 PM.437 VERBOSE [2] getValue: /settings/DatabaseConnectionString : Provider=Microsoft.Jet.OLEDB.4.0;Data Source=".\gbpvr.mdb";User Id=admin;Password=
4/3/2005 6:48:26 PM.437 VERBOSE [2] databaseConnectionString is Provider=Microsoft.Jet.OLEDB.4.0;Data Source="C:\Program Files\gbpvr\\gbpvr.mdb";User Id=admin;Password=
4/3/2005 6:48:26 PM.437 VERBOSE [2] getValue() loading new key/value into cache: /settings/DontAntiAlias
4/3/2005 6:48:26 PM.437 VERBOSE [2] getValue: /settings/DontAntiAlias : false
4/3/2005 6:48:26 PM.437 VERBOSE [2] getValue() loading new key/value into cache: /settings/LoggingLevel
4/3/2005 6:48:26 PM.437 VERBOSE [2] getValue: /settings/LoggingLevel : Info
4/3/2005 6:48:26 PM.484 INFO [2] Starting
4/3/2005 6:48:27 PM.937 INFO [2] Initializing InputDeviceManager
4/3/2005 6:48:28 PM.015 ERROR [2] Unable to find node: /settings/SpecialElements/SpecialElement[@name="MenuType"]
4/3/2005 6:48:28 PM.296 ERROR [2] Error: msg=0x200 (WM_MOUSEMOVE) hwnd=0x603dc wparam=0x0 lparam=0x1120128 result=0x0 : Object reference not set to an instance of an object. : at r.a(Point A_0)
at r.a(Object A_0, MouseEventArgs A_1)
at System.Windows.Forms.Control.OnMouseMove(MouseEventArgs e)
at System.Windows.Forms.Control.WmMouseMove(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at r.a(Message& A_0)
4/3/2005 6:48:44 PM.750 INFO [2] playFile(Megas XLR)
4/3/2005 6:48:51 PM.968 INFO [2] NetRadio buffer size is: 96000

Thanks,
njf

A new release of Guide2J - besides bug fixes the following is a list of new features. Note, the horizontal skin has changed. You will need to update your skins. As always make sure you are using the latest FastFind.

Status bar per timeslot (see if a timeslot has a recording or is in conflict)
Guide loops from highest to lowest channel
Can have indicator of current time
Can show channel numbers next to call sign
Ability to Find More of the same program

I have just installed GBPVR on my PC with a WinTV USB2 and a WinTV Nova-T PCI (old/909 version). On the config screen I have added the WinTV USB2 OK and it works. Problem is when I add the WinTV Nova-T on the config screen, I can't get the 'Map Digital Channels to EPG Channels' to work.

I set the recording source to a BDA Recording Plugin, Set Card Type (Nova-T 909), County and Region. Set the EPG to XMLTV Plugin, and import the EPG. I save these settings as per documentation and then come back to the config screen for the Nova-t. When I press the 'Map Digital Channels to EPG Channels', I get a folder dialog which says 'Point me at the config directory please'. What does this mean ? Although this dialogue appears, it stops responding, and I have to do an 'End Now' to get Windows to shut it down, which closes the config application. HELP, I can't get any further. (Note: I had to install Showshifter to get over the mpgmux.ax problem - just in case this is connected in some way). I have tried switching off virus scanner and fierwall, but get same results.

I have also put a new disk in my PCand done a clean install of XP, XP SP2 and all Windows Updates and then put Nova-T in PC and just installed latest 2.17g drivers.There is nothing else on the system (No WinTV USB2, no Hauppauge TV card software, no MVP software) - and I still get the same problem.

Could it be something to do with the XML data file? I am using Alan Birtles XMLTV utility to generate it. I have also used the same XMLTV data file for the WinTV USB2 and Nova-T, and just selected appropriate channels. Is this OK ?

HELP. Pulling my hair out (and wife is getting annoyed with me spending a lot of time on the PC) !!!!! :confused:

I have set confirm before delete in Xrecord - and it works very well.

But today I tried my first archive - which worked - I then tried what I could do to the recording when archived.

I tried delete - and it deleted with no confirm before delete.
(I just tried with a recordning of no interest to mee)

Is there something I should change or is it a bug?

Anyone using the LCD plugin? Before I spend a lot of effort on a vfd, I just want to make sure it is working for people out there. Also, anyone working on a different version that doesn't require jalcds?

It would be nice if, when viewing the list of pending recordings, the channel number was visible before the show name.

It seems that when you set up a recording manually, it shows the channel number followed by the call-letters (i.e. 59 CNNH), but when setting up a "full-season/all episode" recording, only the show title and brief description are shown. Personally, I think it would be very helpful to also see the channel number and then the show title, the same way as it's shown for manual recordings.

Something like:

50 South Park__________________Scheduled
Brief Description_____________Date and Time

(without the underscores, of course)

-min.

Hello,

I am currently running Windows XP Media Center Edition.

I came accross GB-PVR while looking for something to replace MCE. Downloaded 09108 from a cached link on google... current download link (09109) on homepage is dead btw.

As soon as I atempt to run any of the GB-PVR applications I get a unhandled CLR exception. I am thinking that this may well be something to do with the WinXPMCE recording service hogging my capture cards... I'll just go check.

...OK - disabled both the MCE receiver and scheduler services... made no difference, GB-PVR service fails to start and all apps (GBPVRTray, Configure, GBPVR) fail with a similar unhandled exception dialog.

Just rebooted with the same services disabled. Same problem.

Has anyone had the same problem when trying to install on WinXPMCE? I know you could argue that I ought not to need GB-PVR, but I don't want to get into that right now, and I don't want to have to go formatting my disk to evaluate GB-PVR.

I could, of course, be missing the point completely here and there might be some issue completely unrelated to MCE causing GB-PVR not to work. Either way, I would appreciate some assistance.

Adam.

Hi, I have been having trouble getting my ConvertX TV402u to record TV correctly. It works great for LiveTV, and timeshifting, but unable to record programs correctly.

GBPvr seems to be working correctly, according to the logs it is starting and stopping at the correct times. Also the record light on the ConvertX comes on and goes off at the correct times. The problem is that the record file only has the first minute or so of the recordings in it.

Are any other GBpvr users having similar problems?

I have GBpvr ver 0.91.9 installed. I have both WinDVR and WinDVD creator installed. WinDVR seems to recording correctly.

From the GBpvr logs there are some suspecious stuff ( I'll attach the full logs):

14:30:00.312 VERBOSE FindFilterByName failed to locate filter: Plextor ConvertX TV402U Tuner
14:30:00.328 VERBOSE FindFilterByName failed to locate filter: Plextor ConvertX TV402U Audio

According to graphedit, my filters are called:
Plextor ConvertX TV402U TV Tuner
Plextor ConvertX TV402U TV Audio

I also get this error, not sure if it related to these filters failing:
14:30:00.906 ERROR ConnectFilters:Failed(2)

This is the graph that GBpvr ends up building:
14:30:00.984 VERBOSE Graph contains the following filters:
14:30:00.984 VERBOSE - File Writer
14:30:00.984 VERBOSE - AVI Mux
14:30:00.984 VERBOSE - MPEG Layer-3
14:30:00.984 VERBOSE - Plextor ConvertX TV402U A/V Capture
14:30:00.984 VERBOSE - Plextor ConvertX TV402U CrossBar
14:30:00.984 VERBOSE - Plextor ConvertX TV402U TV Audio
14:30:00.984 VERBOSE - TV Tuner

So it looks like it finds the Plextor ConvertX TV402U TV Audio filter... but not the Plextor TV Tuner filter.

Also it doesn't use the GBpvr File Writer filter, it uses the generic one instead.

If anyone has solved this problem before, let me know. Also if any TV402u users have it working perfectly, could you look in your logs and see if anything looks different. Thanks!