[h=1]Hi UJB

[/h][h=1]I get the error below trying to stream from the NEWA screen?[/h]VLC installed correctly.
[h=1]Server Error in '/' Application.

I've been using NextPVR for well over a year now. I went to run it this morning, and when clicked on the icon, I saw the Microsoft spinning icon, and then nothing happened. I look at the windows services and it says NextPVR is not running. I tried to run the service and got an error which I've uploaded. I checked the log files, and there is nothing in there. No files at all. Just for fun I did a system restore to a couple days ago, and continue to have the same issue. Uninstalled, and reinstalled NextPVR, and still no luck. Without the log files I am not sure what further information I can give.

This may be more system information than you need, but if I can provide anything else, please let me know.

Thank you in advance.

OS Name Microsoft Windows 8.1 Pro with Media Center
Version 6.3.9600 Build 9600
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name DELL-620-PC
System Manufacturer Dell Inc.
System Model Inspiron 620
System Type x64-based PC
System SKU To be filled by O.E.M.
Processor Intel® Core™ i5-2310 CPU @ 2.90GHz, 2901 Mhz, 4 Core(s), 4 Logical Processor(s)
BIOS Version/Date Dell Inc. A04, 11/21/2011
SMBIOS Version 2.6
Embedded Controller Version 255.255
BIOS Mode Legacy
BaseBoard Manufacturer Dell Inc.
BaseBoard Model Not Available
BaseBoard Name Base Board
Platform Role Workstation
Secure Boot State Unsupported
PCR7 Configuration Binding Not Possible
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "6.3.9600.17196"
User Name Dell-620-PC\Media Center
Time Zone Central Standard Time
Installed Physical Memory (RAM) 8.00 GB
Total Physical Memory 7.98 GB
Available Physical Memory 5.82 GB
Total Virtual Memory 9.23 GB
Available Virtual Memory 6.92 GB
Page File Space 1.25 GB
Page File C:\pagefile.sys
Hyper-V - VM Monitor Mode Extensions Yes
Hyper-V - Second Level Address Translation Extensions Yes
Hyper-V - Virtualization Enabled in Firmware Yes
Hyper-V - Data Execution Protection Yes

Just installed NPVR 3.9.2.161119 but cannot get it to show live TV. I downloaded EPG, Setup the TV adaptor, installed SAF 6.32. Main screen shows EPG list but when I tried to view a channel the recording service stops and I get message "unable to communicate with recording service". Event viewer shows nrecord.exe stops with Faulting module name: DivX.dll. Same with NDigitalHost.exe, same dll. Yet I can run the recording service with a command line window using "cd "C:\Program Files (x86)\NPVR" & nrecord.exe RUN" and it all works well. But I have to keep the command line window open with nrecord running. If I close this window NextPVR hangs.
The divx.dll module referenced in Event Viewer was not in system32 as the viewer claimed it was so I downloaded one from http://www.dlldump.com but it made no difference. I have now reinstalled NextPVR 4 times.
Any ideas?

A lot of information I have surfed down regarding use of an R5000-HD with NPVR seems pretty dated, which is expected as the device is no longer made.... However I wonder if someone could point me to instructions for setup of the device which should still be appropriate? Here's where I am so far:

R5000 is setup on a Windows 7 PC and fully working, both manually (via its own software interface) and as controlled using SageTV.
SageTV service disabled, so it's no longer running.
Installed NPVR.
Downloaded NetworkRecorder.dll and placed in \Users\Public\NPVR\NetworkRecorder directory.
Downloaded NetworkRecorder.xml but wasn't sure where it's meant to be located - tried several NPVR locations (\Users\.etc and \Program Files (x86)). Verified its looking at 127.0.0.1 port 6969

NPVR Service starts/stops fine with no errors. But no network recorder shows up in the Devices...

Am I required to run the NextCom basic Windows driver or can I not use the one tailored for SageTV (I thought this was just the basic with addition of SageTV page, which can be disabled)?

Any help is appreciated!

Cheers,
RLW

Neither of my client pc's can stream live tv. They always fail with the message:" The tuner you were using was required for a recording...".
I have 4 tuners and none are recording when I get this message.
Attached are the logs for the client and the server computers.

I think the error occurs is this snippet from NRecord.log on the server...

2017-02-24 16:54:21.687 [DEBUG][6] ReloadSettings()
2017-02-24 16:54:21.688 [DEBUG][6] Checking for new capture devices
2017-02-24 16:54:21.688 [DEBUG][6] CaptureSource.LoadAll()
2017-02-24 16:54:21.718 [DEBUG][6] ReloadSettings()
2017-02-24 16:54:21.719 [DEBUG][6] Checking for new capture devices
2017-02-24 16:54:21.719 [DEBUG][6] CaptureSource.LoadAll()
2017-02-24 16:54:39.434 [DEBUG][19] StartStream(7153:KDBC-TV)
2017-02-24 16:54:39.434 [DEBUG][19] looking for capture source
2017-02-24 16:54:39.434 [DEBUG][19] checking: Silicondust HDHomeRun Tuner 1047CA01-0 (ATSC)
2017-02-24 16:54:39.434 [DEBUG][19] enabled and present
2017-02-24 16:54:39.434 [DEBUG][19] has channel
2017-02-24 16:54:39.435 [DEBUG][19] live tv is possible
2017-02-24 16:54:39.435 [DEBUG][19] Asking NDigitalHost to start: LIVE&C:\Users\Public\Videos\live-KDBC-TV-8757.ts
2017-02-24 16:54:39.684 [DEBUG][19] Live TV handle: 0x1D0035
2017-02-24 16:54:49.750 [DEBUG][19] Renew lease ok (0x1D0035)
2017-02-24 16:54:59.804 [DEBUG][19] Renew lease ok (0x1D0035)
2017-02-24 16:55:09.873 [DEBUG][19] Renew lease ok (0x1D0035)
2017-02-24 16:55:19.927 [DEBUG][19] Renew lease ok (0x1D0035)
2017-02-24 16:55:29.993 [DEBUG][19] Renew lease ok (0x1D0035)
2017-02-24 16:55:40.060 [DEBUG][19] Renew lease ok (0x1D0035)
2017-02-24 16:55:50.122 [DEBUG][19] Renew lease ok (0x1D0035)
2017-02-24 16:56:00.180 [DEBUG][19] Renew lease ok (0x1D0035)
2017-02-24 16:56:00.893 [DEBUG][19] GetExtraInfo: /Settings/Recording/LiveTVBufferDirectory
2017-02-24 16:56:00.893 [DEBUG][19] GetExtraInfo@exit
2017-02-24 16:56:00.918 [DEBUG][19] StartStream(7153:KDBC-TV)
2017-02-24 16:56:00.919 [DEBUG][19] looking for capture source
2017-02-24 16:56:00.919 [DEBUG][19] checking: Silicondust HDHomeRun Tuner 1047CA01-0 (ATSC)
2017-02-24 16:56:00.919 [DEBUG][19] enabled and present
2017-02-24 16:56:00.919 [DEBUG][19] has channel
2017-02-24 16:56:00.919 [DEBUG][19] live tv is possible
2017-02-24 16:56:00.920 [DEBUG][19] Asking NDigitalHost to start: LIVE&C:\Users\Public\Videos\live-KDBC-TV-5314.ts
2017-02-24 16:56:00.933 [DEBUG][19] Live TV handle: 0x1D0036
2017-02-24 16:56:10.251 [DEBUG][19] Renew lease ok (0x1D0035)
2017-02-24 16:56:12.212 [DEBUG][3] ClientConnectionHandler started...
2017-02-24 16:56:12.212 [DEBUG][3] increased send socket send buffer
2017-02-24 16:56:20.315 [DEBUG][24] Renew lease ok (0x1D0035)
2017-02-24 16:56:23.321 [DEBUG][4] ClientConnectionHandler started...
2017-02-24 16:56:23.321 [DEBUG][4] increased send socket send buffer
2017-02-24 16:56:23.321 [DEBUG][4] ClientConnectionHandler exiting...
2017-02-24 16:56:26.041 [ERROR][10] Live stream expired without 15 second renewal. (handle:1D0036)
2017-02-24 16:56:26.041 [DEBUG][10] StopStream(36)
2017-02-24 16:56:30.369 [DEBUG][19] Renew lease ok (0x1D0035)
2017-02-24 16:56:34.413 [DEBUG][26] ClientConnectionHandler started...
2017-02-24 16:56:34.413 [DEBUG][26] increased send socket send buffer
2017-02-24 16:56:34.465 [DEBUG][26] CLIENT-OPEN: C:\Users\Public\Videos\live-KDBC-TV-5314.ts
2017-02-24 16:56:34.465 [DEBUG][26] CLIENT-OPEN@1
2017-02-24 16:56:34.465 [ERROR][26] CLIENT-OPEN: file does not exist
2017-02-24 16:56:34.465 [DEBUG][26] CLIENT-OPEN@ file opened
2017-02-24 16:56:34.465 [DEBUG][26] CLIENT-OPEN: failed...
2017-02-24 16:56:34.465 [ERROR][26] Unexpected exception in ClientConnectionHandler: System.NullReferenceException: Object reference not set to an instance of an object.
at NShared.ClientConnectionHandler.WorkerThread()
2017-02-24 16:56:34.465 [DEBUG][26] Cleaning up: C:\Users\Public\Videos\live-KDBC-TV-5314.ts
2017-02-24 16:56:34.466 [DEBUG][26] ClientConnectionHandler exiting...
2017-02-24 16:56:38.300 [DEBUG][24] Renew lease failed (0x1D0036)
2017-02-24 16:56:38.300 [DEBUG][24] liveHandleRenewalTime contains 1 handles:
2017-02-24 16:56:38.300 [DEBUG][24] - 0x1D0035
2017-02-24 16:56:38.302 [DEBUG][24] StopStream(36)
2017-02-24 16:56:40.426 [DEBUG][24] Renew lease ok (0x1D0035)
2017-02-24 16:56:50.489 [DEBUG][19] Renew lease ok (0x1D0035)
2017-02-24 16:57:00.559 [DEBUG][4] Renew lease ok (0x1D0035)
2017-02-24 16:57:10.622 [DEBUG][4] Renew lease ok (0x1D0035)
2017-02-24 16:57:20.682 [DEBUG][19] Renew lease ok (0x1D0035)
2017-02-24 16:57:30.752 [DEBUG][27] Renew lease ok (0x1D0035)
2017-02-24 16:57:40.809 [DEBUG][27] Renew lease ok (0x1D0035)
2017-02-24 16:57:50.877 [DEBUG][26] Renew lease ok (0x1D0035)


Any suggestions?

Jim

After grappling for a couple of years with issues getting email successfully delivered to some domains (like yahoo and hotmail), I'm now paying for a commercial email service to take care of email delivery. This seems to have been successful, and I can see the email is now getting thru.

So...you may find you've now started getting emails for thread subscriptions etc, which you were never getting in the past. New users should hopefully have more success registering and activating their accounts etc.

Hi all. Have just jumped on the NextPVR and KODI bandwagon from WMC (where including today my tuner worked fine). Have installed NextPVR and followed instructions (disabled WMC) but when scanning it is not finding a single channel (even on all countries all regions)?
Logs attached

Updating epg from dvn/atsc takes forever when you hve a lot og channels on different frequencies, In my case some og the epg is on frequencies where I don't have any usable channels, nevertheless I have to include at least one channel from that freq. in order to get any epg. Is there a way to make npve scan a frequency for epg without having a channel defined?

Ideally, I would like to see npvr do an initial scan, find out what frequencies gives more than two hours of epg and then only use those frequencies until a new "initial scan" is done. Sub, can you fix that?

I am very very new to this (Extracting Subtitles), so, I have what may be a stupid question

Does the files that i record in NPVR have built in subtitles? Or, does it depend on the PVR unit I am using?

I am currently using a "Hauppauge 1212 HD-PVR High Definition Personal Video Recorder"

I also have a paid version of "Video ReDo TV Suite 5"

So, does NPVR do what I need? and, do I have the tools to do this ?

I just installed and setup NPVR and connected my channels to the OTA listings (option 1). I updated the EPG and only got 2 hours of listings. The rest of the schedule is "(no show)".

Is this a problem with using the OTA listings? Do I need to go to Schedules Direct to get a decent length of schedule? How many days is typical?